20 lines
922 B
Text
20 lines
922 B
Text
Installing this port will allow host startup to update the CPU microcode on
|
|
a FreeBSD system automatically. In order to enable this feature, add the
|
|
following to the system's /etc/rc.conf:
|
|
|
|
microcode_update_enable="YES"
|
|
|
|
To ensure the update is applied, reboot the system or start the microcode update
|
|
service via:
|
|
|
|
# service microcode_update start
|
|
|
|
If the CPU requires a microcode update, a console message such as the following
|
|
will appear:
|
|
|
|
Updating CPU Microcode...
|
|
/usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl0 from rev 0x17 to rev 0x22... done.
|
|
/usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl2 from rev 0x17 to rev 0x22... done.
|
|
/usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl4 from rev 0x17 to rev 0x22... done.
|
|
/usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl6 from rev 0x17 to rev 0x22... done.
|
|
Done.
|