2.10

PAYLOADS/2.10/eecrt0.ee.S

@@ -7,6 +7,7 @@ _start:
 	# Point stack to end of scratchpad RAM
 	#la $sp, 0x70004000
 
+	# debug
 	la $v0, 0x01FFF7D0
 	sw $v0, 0($v0)
 

PAYLOADS/2.10/eepayload.ee.c

@@ -25,12 +25,13 @@ int main(void) {
 
 	flush();
 	
-	SifInitRpc(0);
-	SifExitRpc();
-	while(!SifIopReset("", 0));
-	while(!SifIopSync()){};
-	
+	// These aren't needed to launch uLE at least, and make compatibility worse, so commented out...
 	//SifInitRpc(0);
+	//SifExitRpc();
+	//while(!SifIopReset("", 0));
+	//while(!SifIopSync()){};
+	
+	// //SifInitRpc(0);
 	
 	volatile void **entry_point_address = (void *)0x01FFF7E0;
 	ExecPS2(*entry_point_address, 0, 0, 0);

PAYLOADS/2.10/stage1.iop.S

@@ -4,8 +4,10 @@
 # entry (0xb7548 + 0x5c700 - 0xb1000) = 0x62C48 (0xa0062C48) # hardware
 
 
+
 #readSector = 0xb260c # repacked
-readSector = (0xb260c + 0x5c700 - 0xb1000) # real hardware
+readSector = (0xb260c + 0x5c700 - 0xb1000) # real hardware - through wle
+#readSector = (0xb260c +  - 0xb1000 - 0x400) # real hardware
 
 flushIcache = 0x00002f40
 flushDcache = 0x0003044
@@ -36,10 +38,12 @@ _start:
 	
 	# Return gracefully back to original return address
 	#la $a0, 0x1f62ac # repacked
-	la $a0, (0x1f62ac + 0x1F3058 - 0x1f6258) # hardware
+	#la $a0, (0x1f62ac + 0x1F3058 - 0x1f6258) # hardware
+	la $a0, (0x1f62ac + 0x001F3058 - 0x1f6258) # hardware
 	
 	#la $ra, 0xb3630 # repacked
 	la $ra, (0xb3630 + 0x5c700 - 0xb1000) # hardware
+	#la $ra, (0xb3630 +  - 0xb1000 - 0x400) # hardware
 	
 	sw $ra, 0($a0)
 	

README.md

@@ -68,7 +68,7 @@ Boot your PlayStation 2 without any disc inserted, and press Triangle to identif
 
 **Currently only support:**
 
-- 2.10 (tested on U and J regions on real hardware, any language works) - UPDATE: my testers have just informed me that this ISO is only working when an HDD is inserted, I will port it to work without a HDD soon.
+- 2.10 (all regions and languages),
 
 - 3.04 (tested only region M in emulator so far, but guess most other regions EUMACDG, except for J will work - with English language set in settings),