configure ntpd to serve as local tiem server for virtual machines

ntp.conf

@@ -0,0 +1,119 @@
+#
+#
+# Default NTP servers for the FreeBSD operating system.
+#
+# Don't forget to enable ntpd in /etc/rc.conf with:
+# ntpd_enable="YES"
+#
+# The driftfile is by default /var/db/ntpd.drift, check
+# /etc/defaults/rc.conf on how to change the location.
+#
+
+#
+# Set the target and limit for adding servers configured via pool statements
+# or discovered dynamically via mechanisms such as broadcast and manycast.
+# Ntpd automatically adds maxclock-1 servers from configured pools, and may
+# add as many as maxclock*2 if necessary to ensure that at least minclock
+# servers are providing good consistent time.
+#
+tos minclock 3 maxclock 6
+
+#
+# The following pool statements will give you a random set of IPv4 and IPv6
+# NTP servers geographically close to you.  A single pool statement adds
+# multiple servers from the pool, according to the tos minclock/maxclock
+# targets.
+# See http://www.pool.ntp.org/ for details.  Note, pool.ntp.org encourages
+# users with a static IP and good upstream NTP servers to add a server
+# to the pool.  See http://www.pool.ntp.org/join.html if you are interested.
+#
+# The option `iburst' is used for faster initial synchronization.
+#
+pool 0.freebsd.pool.ntp.org iburst
+pool 2.freebsd.pool.ntp.org iburst
+
+#
+# If you want to pick yourself which country's public NTP server
+# you want to sync against, comment out the above pool statements,
+# uncomment the next ones, and replace CC with the country's abbreviation.
+# Make sure that the hostnames resolves to a proper IP address!
+#
+# pool 0.CC.pool.ntp.org iburst
+# pool 2.CC.pool.ntp.org iburst
+
+#
+# To configure a specific server, such as an organization-wide local
+# server, add lines similar to the following.  One or more specific
+# servers can be configured in addition to, or instead of, any server
+# pools specified above.  When both are configured, ntpd first adds all
+# the specific servers, then adds servers from the pool until the tos
+# minclock/maxclock targets are met.
+#
+#server time.my-internal.org iburst
+
+#
+# Security:
+#
+# By default, only allow time queries and block all other requests
+# from unauthenticated clients.
+#
+# The "restrict source" line allows peers to be mobilized when added by
+# ntpd from a pool, but does not enable mobilizing a new peer association
+# by other dynamic means (broadcast, manycast, ntpq commands, etc).
+#
+# See http://support.ntp.org/bin/view/Support/AccessRestrictions
+# for more information.
+#
+restrict default limited kod nomodify notrap noquery nopeer
+restrict source  limited kod nomodify notrap noquery
+
+#
+# Alternatively, the following rules would block all unauthorized access.
+#
+#restrict default ignore
+#
+# In this case, all remote NTP time servers also need to be explicitly
+# allowed or they would not be able to exchange time information with
+# this server.
+#
+# Please note that this example doesn't work for the servers in
+# the pool.ntp.org domain since they return multiple A records.
+#
+#restrict 0.pool.ntp.org nomodify nopeer noquery notrap
+#restrict 1.pool.ntp.org nomodify nopeer noquery notrap
+#restrict 2.pool.ntp.org nomodify nopeer noquery notrap
+#
+# The following settings allow unrestricted access from the localhost
+restrict 127.0.0.1
+restrict ::1
+
+#
+# If a server loses sync with all upstream servers, NTP clients
+# no longer follow that server. The local clock can be configured
+# to provide a time source when this happens, but it should usually
+# be configured on just one server on a network. For more details see
+# http://support.ntp.org/bin/view/Support/UndisciplinedLocalClock
+# The use of Orphan Mode may be preferable.
+#
+server 127.127.1.0
+fudge 127.127.1.0 stratum 10
+
+# VM networking
+server 10.0.0.1
+fudge 10.0.0.1 stratum 10
+restrict 10.0.0.1 mask 255.255.255.0
+
+# See http://support.ntp.org/bin/view/Support/ConfiguringNTP#Section_6.14.
+# for documentation regarding leapfile. Updates to the file can be obtained
+# from ftp://time.nist.gov/pub/ or ftp://tycho.usno.navy.mil/pub/ntp/.
+# Use either leapfile in /etc/ntp or periodically updated leapfile in /var/db.
+#leapfile "/etc/ntp/leap-seconds"
+leapfile "/var/db/ntpd.leap-seconds.list"
+
+# Specify the number of megabytes of memory that should be allocated and
+# locked. -1 (default) means "do not lock the process into memory".
+# 0 means "lock whatever memory the process wants into memory". Any other
+# number means to lock up to that number of megabytes into memory.
+# 0 may result in a segfault when ASLR with stack gap randomization
+# is enabled.
+#rlimit memlock 32